Halloween Pumpkin Boy

If you could create your very own 3D print monster, what would it look like? Halloween Pumpkin Boy may be a typical unmissable Halloween toy.

In all 4 stl files you could set the best resolution for the best result, for a better painting effect. The supports may not so hard to remove, then try to assemble it before your paint.

A base primer can add a lot tinting strength of your model. So spread a layer of 360 degree base primer first. Due to the main light-color better use white primer.

Dilute yellow with some paint thinner, pour into your airbrush.Shake well to make sure the pigment won't jam the brush. Padding the face part and the body.

Add a little red into the palette. Then repeat the 3rd step, spray a wide range and cover the sunken part.

Add more red and keep modulating till the yellow turn into orange. Then cover a thinner range on the sunken part. The pumpkin skin is finished now.

You may find the surface is a little bit bright. So we need to reduce that effect to strengthen more stereoscopic impression.

Simply draw some green on the yellow hair. And spray the overcoat and shoes with dark blue.

Modulate white & yellow to highlight the pumpkin's eye.

Paint pure green on the lantern, then brush some light yellow. Spray pure black on the stick. (Brush the cross with black as a base color)

Paint a layer of silver on cross, and you can also DIY some individual patterns if you like. Take free-rein creation and enjoy your own Halloween pumpkin :)