Han Solo's DL-44 Blaster

So Halloween is here and you probablydon't have any good props, so here's my DL-44 Blaster

A Dremmel

Primer

Gloss Black spray paint

Metallic Silver spray paint

masking tape

A Rubie's han solo blaster

take a drillbit from your dremmel kit, prefably one that fits the hole size and drill out the holes, once each hole is drilled out, remove the front grill by cutting out around the edge of the front grill, sand it down and prime the front

for your first coat, add a layer of primerto both sides, then put a layer of gloss black on either side, once the black has cured, mask off the areas shown on the diagrams and spray those silver

this is what your finished DL-44 blaster should look like. It was a short one but a good one.

Happy Halloween 'yall!