Harry Potter Howler Bookmark

Materials Needed :
Red Card
White Card
Glue
Scissors
Pinking Sheers
Pencil
Ruler

Mark a 12cm by 12cm square on the red paper & cut, while mark a 11cm by 11cm square on the white paper & cut.
Then divide each square into 4 equal parts.
With that in mind take two of the smaller squares diagonally from each other and draw lines diagonally.

Cut out the pieces marked in the previous instruction, keep the extra white square you can use it!
Mark & cut out 6cm by 1cm on the red paper & cut a small triangle out one end making the tongue. Then glue the other end & stick underneath one side of the triangle.
Then Fold over one side of the white triangle piece glue on top & stick down the other piece.
Glue the back of the white paper & stick down on the centre of the red. Repeat the same step with sticking down the remaining red pieces.

Find that spare square that was originally cut, use pinking sheers & trim off the edges.
Flip the bookmark over & stick down the white piece in the centre of the back of the bookmark.
Flip back round.
Cut a small strip of the remaining white the length of the opening of the bookmark & snip with the pinking sheers to give the look off teeth. This then can be glued on underneath the opening.
Then thats you finished!