Hidden Outdoor Lounge Bench

Hi

I wanted to test this design before I built it and thought that Instructables was a good idea.

I wanted to make something to sit on near the fire in the garden.

It should be low to fit the fire.
Foldable to be outside all summer
Have multi purpose.

This is my idea

The materials I want to use is normal plywood which is 20mm thick.

The pictures show the sizes of the materials.
All dimensions are in mm.
1 x Top
550x1100
1x Buttom
500x1000
2 x Back/front
480x1000
2 x End
500x500

Beam
50x45x1000

The beams are mounted on the buttom in the specified spots and the back is mounted.
The beam is mounted on the back

The ends are mounted on the frame setup as specified

The front beam for the fabric is mounted as specified

The fabric is mounted from the top of the back beam to the back of the front beam. The idea is to mount the fabric on top of the back with nails and on the buttom of the front with nails

The top is mounted together with the front with a beam and the top is mounted with a hinge.

That is all done

Please come with inputs

Update:
18.12.10 - Inserted picture of hinge to keep the top from dropping