Hide the AC Unit

Tools and Materials:

Four fence posts

One 4 x 8 sheet of plastic lattice

Three 8' strips of Lattice trim

Post hole digger

Circular Saw

Electric Screw driver

Concrete

I dug four holes and set my posts in concrete at each corner.

From the 4 x 8 sheet of lattice cut three pieces. Measure the distance from the bottom of your post to the top edge.

Measure the distance between the post and cut the lattice 1/2" smaller.

Cut and install (screw) a piece of lattice trim on each post. Slide the cut panels into the trim pieces.