Holder for Black&Decker RT650KA

Some times I need to use my rotary tool fixed to a table to make cuts, sanding and other operations easily, so I desinged and printed some parts to fix my machine.

The RT650KA has a grey cap in the front which is threaded. I made a new threaded cap so I can fix easily the tool to the printed support.

Go to http://www.thingiverse.com/thing:1236890, download and print the stl files.

You will need:

• 4 x M4 screws and nuts.
• 1 x M3x10 screw, washer and nut.
• 1 x 20x90mm velcro without glue.
• 1 x 20x25mm velcro with glue.
• 1 x Ø2x25mm shaft.
• I used a piece of wood for fixing the set to a table, but you can use an aluminium profile, for example.