Home Built DIY Home Security Alarm System

by techipal in Circuits > Sensors

26704 Views, 75 Favorites, 0 Comments

Home Built DIY Home Security Alarm System

The Kit.jpg
Key Switch.jpg
Main Board.jpg
Zone Module.jpg
Speaker.jpg
Transformer.jpg
Power Supply Module.jpg
Siren Module.jpg
Siren Control Unit.jpg
Front Console Panel Display.jpg
Interior - Display Panel.jpg
IMG1.jpg
Complete Assembly.jpg
Breaker Units.jpg
Micro Switches.jpg
Reed Switch Sensors.jpg
A Complete Home Security System developed according to each clients requirements this alarm is built from scratch, while obtaining circuits from the internet which then were subject to several modifications and prototype testing.

Feature Included -

24/7 UPS Backup in event of mains failure or intruder attempting to disconnect the mains.
6 Zones each with Individual Status and temper indications with Reset
Timable Exit / Entry Mode to activate Alarm after leaving home.
Buzzer to indicate Exit / Entry timer count down.
External Siren to activate in armed when away from home
IN HOUSE / OUT HOUSE mode with programmable features
Instant Zone Sensor for securing vaults and safes.
High pitch In built Police Siren Simulator
Panic & Tamper Proof resistant.
External Hard Wire Tamper Proofed - Alarm will trigger if any hard wires leaving unit is cut.
Emergency Breaker Units - Operates in 'IN HOUSE' mode to de activate doors while leaving the rest of the house secured.
High Quality Flame Resistant Polychrome Casing.
Heavy Duty Industrial Key Switch.