Home Warming Technology. (Styrofoam)

Hello friends. Now I will tell you about the technology of warming the foundation.

Before warming it is necessary to prepare a site for gluing the insulation.

Originally removed the ground. For easy operation.

Glue the foam on the site for insulation. Glue the insulation with special glue. Glue was applied first to the foam. Then he put it on the wall.

The foam should be fixed with special nails. And the remaining hole foam foam. After that, straighten the curves of the joints of the foam.

On the side of the foam I will glue a special reinforcing mesh. First on the plaster sidewalls to make neat angles. Reinforcing mesh will give strength.

After I finished processing the corners of the foam.

I proceed to gluing the mesh on a flat surface of the heater. This is the easiest part of the job.

After the glue has dried well. The lower part of the foundation must be treated with bitumen mastic, which would not get moisture.

The result was the same. The foundation is warmed and processed with mastic.

All this technology was recorded on video, and laid out on YouTube