Home-made Gumball Machine

Here is a home made gumball machine that uses 1/2 inch gumballs

First I had to create the handle and the axle for the gumball mechanism for the gumball machine

I created this piece make a place for the quarter to rotate in while you turn the handle

This is the piece where you have to put in the quarter when you order a gumball

This is the piece that holds the coin while it goes inside the two pieces witch is controlled by the handle's axle

I added this piece to the axle to create less force on the wood and the axle

This piece is attached to the axle to create the motion in the next gear to move the gumballs around the machine

This piece moves the gumballs from the pickle jar to the slide to the person

This piece holds the gumball gear to hold it and also lets it spin this piece also holds the pickle jar that holds all the gumballs

This piece holds all the gumballs

This piece was used to transfer the gumball from the gear to the person

This piece holds all the wood still from the bottom of the machine

Here is all the instructions to recreate your very own gumball machine