Homemade DC Coupler (battery Shell) for Canon PowerShot SX150

Dear friends,

I have a project that record leaf movements of plants due to different light directions. So I need to record at least 5-6 hours to capture movement of plants. I have Canon PowerShot SX150 which is run via 2 AA battery equals to 3.15V. I used it before and 2 AA battery were not enough for recording 5-6 hours. They were finished until capture a movement. So I decided to make a DC coupler (battery shell) and also 3.15 2A regulator. I have succeed and prepared a video about how to make a DC coupler for Canon PowerShot SX150. Next instructable will be about How to make 3.15V regulator for this purpose.

Inventory;

- a knife, dremel, (optional)

- permanent pencil

- basically soldering equipment

- scissor

- hot glue

- rasp

- plastic tape

- lighter

- Canon PowerShot SX150 or equivalent camera and 3.15V 2A power supply

Consumable materials;

- 2 x 5ml injections

- 3 x consumed AA battery

- red and black bell wire about 15-20 cm (optional)

- macaron cable (melting cable)

I prepared a video that involving all step of making DC coupler (battery shell).

Good luck with it.