Homer Phone Stand
Here I have Homer as a phone stand for all the Simpson lovers..!!!
Requirements
![IMG_2701[1].JPG](/proxy/?url=https://content.instructables.com/F0L/KE6X/I2CV8V4R/F0LKE6XI2CV8V4R.jpg&filename=IMG_2701[1].JPG)
![IMG_2699[1].JPG](/proxy/?url=https://content.instructables.com/FLK/083C/I2CV8V7K/FLK083CI2CV8V7K.jpg&filename=IMG_2699[1].JPG)
![IMG_2700[1].JPG](/proxy/?url=https://content.instructables.com/FYP/K9MX/I2CV8WYI/FYPK9MXI2CV8WYI.jpg&filename=IMG_2700[1].JPG)
- Wood
- Glue
- AutoCad
- CorelDrawing
- Laser
Draw Homer
Draw Homer on AutoCAD. The best way to do it is placing a picture of Homer on the background. For Homers are needed. Each of the two are reflections of each other. Only two has an extension that goes into the base.
For the drawing put the dimension that best suits your need. For this one, it has to be a minimum of 3" both verstically
Draw Base
Draw a star on AutoCAD. It's better to have all the sides of the star to be of the same length. The small rectangles are to be of the same measurement as the pegs on the Homer's feet.
Cutting
![IMG_2702[1].JPG](/proxy/?url=https://content.instructables.com/FJD/ZQC4/I2CV8V5S/FJDZQC4I2CV8V5S.jpg&filename=IMG_2702[1].JPG)
![IMG_2703[1].JPG](/proxy/?url=https://content.instructables.com/FQ4/N12U/I2CV8U4E/FQ4N12UI2CV8U4E.jpg&filename=IMG_2703[1].JPG)
![IMG_2704[1].JPG](/proxy/?url=https://content.instructables.com/FRP/PE32/I2CV8V3W/FRPPE32I2CV8V3W.jpg&filename=IMG_2704[1].JPG)
Cut out the 4 Homers and the star base by a laser printer.
Glue & Enjoy
Glue 2 homers together. One that has pegs with the one that does not. Put the pegs through the rectangular holes in the base and glue them.
And you have you finished product to enjoy.