How to Build a Robot That Pulls 5 Pounds

Agnes Koroma, Areej Ali, Safiyya Qadir

Move the control and place it flat onto the robot.

Tape the battery on top of the control.

use the 100mm wheel to add on each side

Place the 100mm wheel on each side

in order to extend the front of the robot you need four angle bars

extend the angle bars on each side in the front of the robot in order to add an extra 100mm wheel then close it with another angle bar in front of the wheel.

download a go forward progrm onto the robot

This will be used in step 6

add 2 2.5 weights on the back of the sled

Then add a sled on the back of the robot.

1. 3 100mm wheels
2. 3 10 hole angle bars
3. 4 chassity rails
4. vex controller
5. battery
6. 2 motors
7. keps nuts
8. 8-32 screws
9. 2 60 tooth gears
10. 2 12 tooth gears
11. collars
12. 1 5 hole angle bar
13. sled

Robot calculations