How to Build a Simple Solderless Circuit.

Hello again! This is Craft Maker Infinity doing another collaboration with JM1999! :)

In this instructable, JM1999 will be showing you how to make a simple, solderless circuit! (BTW I used to try to make these, but they didn't turn out so good, but JM1999 has figured out how to do it in a much easier way!) ;3

What you will need is:

One 9 volt battery, two copper wires (about 3 inches long each), scissors (or a wire stripper), PVC electrical insulation tape (Tradeforce brand is what JM1999 uses here), an LED Light emitting diode (make sure it has the posts, which are the two rod-like wires sticking out), and a 510 ohm resistor (Green-Brown-Brown).

Once again, thank you JM1999 for his part in this instructable, and for coming up with such a great idea! ;)

Stay creative!

-CMI and JM1999