How to Change a Flat Tire

A pump, an extra tire, and the tire changing tools

Press on tire to check sir pressure.

All you have to do is loosen the brake and unscrew and take off the tire.

Use the tire changing tools and put the flat end into the tire side, run the tool all the way around the tire, so half of the tire is not on the rim.

Take the old inner tube out of the tire and inflate the new one just enough to give it some definition.

Start by putting the pump valve in first and than just rotate around the tire.

Use those useful nameless tire tools I told you about to put connect the tire and rim once again, the lash few inches are kind of hard but that's where we need to use some of that elbow grease.

Put the rim back on the bike than tighten it back on, after this you can retighten your brake.

!Warning! Do not replace a tire that just popped, it will save you money to purchase a $5 patching kit rather than a $25 inner tube. Otherwise have fun.