How to Get Tv Apps to Work on Directv ( Belkin Router)

Tv apps is a built in feature in directv, unfortunately it does not work in 90% of the places I have been watching directv. Usually you get a error 301, or, tv apps is still initializing try again later. This is how to fix it, at least on a belkin router. (Note... For some reason this only works for one tv.)

First, Press MENU on your remote use the arrow keys to navigate to Settings and Help. go to... Settings, Reset, Restart receiver. And then do that.

Now, your receiver should be restarting, as it is doing this: [on the "welcome" screen] PRESS 0 2 4 6 8 on your remote control. This forces it to get a software update, updating it to the newest version!

On your COMPUTER Or any computer You have to Get into your belkin wireless settings. To do this you must type the following into any browser window Put in http://192.168.2.1 This will open up your wireless settings (***warning***) don't play around in here you can really mess up your Internet, do only what I tell you and get out.

Now that we're in the belkin settings,in the left most column there is something called virtual servers, click on that. If it asks for a password put it in, if you know that you have set a password , or have a reason to think there is a password, you will need it, this is a dead end, if you don't have it or can't get it. Good news, if you know there is no password that you or anyone has set, just leave it blank and press submit.

Now we're in virtual servers Here you can see on the right side a grid that can be filled in. You are going to add three lines to this grid. Check the enable box on three lines In the name box type directv in all three lines In the first box in the drop down menu select udp in the other two boxes select tcp@udp In the in the row where udp is selected type 1701 in the boxes for inbound port and again in the private port boxes. Type 27177 in one of the the other rows in the same port boxes. Put the number 27178 in the other row in the same two spots, then in each row there is only one box yet to be filled. The private IP address in these three boxes put 2 Looks confusing but it's not... just look at the picture.

Apply changes, and exit your browser (Your router may kick you off the Internet) If it does, just reconnect, it will be ok.

Step 9. Now back to your directv Go back into settings, the same way as in the first step, menu...settings and help....settings But this time were going into- Network setup then network services Make it look like this: Configuration type (manual) Stb services port (27177) Audio services port (27178) Then go to Connect now