How to Give Your Nerf Maverick More Power

Hi all. This is my first instructable and hope you guys like it. This is how to give your nerf maverick more power instead of getting a spring replacement. But first disassemble your maverick.

Remove the screws from the priming handle first.

Once you have all the screws taken out remove your priming handle

Put your priming handle parts aside till you reassemble your gun

Now remove your screws from the base of the gun

Once you have your screws out of the base pry the base part with a flat head screwdriver. You should then see this

Next get 5 pennies (I'll be using U.S pennies)

Put your pennies behind the spring

Next put your priming handle part (the one that has a metal rod) under the gun like this. There is then a spring that you must attach to the rod

Then put your base on top and snap it on. You must then put all the base screws back in

Then Put your priming handle together. Attach the metal rod to the other handle part like this

Then screw your priming handle together

You are now done with this mod. But be a little careful with this gun. I found that when I shot people with this gun it actually left red spots on they're skin. But would disappear after a while. And they do hurt when done with this mod. Thanks for reading,