How to Install the LED BMW Angel Eyes

This INSTRUCTABLE will guide you thru the steps for installing the high power H8 LED BMW Angel Eyes base on a 2008 BMW X5.

The BMW Angel Eyes will get rid of the dull yellow look for a nice xenon white HID matching look similar to the all new new 2011 BMW E92 3 Series and 2011 BMW 5 Series.

This BMW Angel Eye Kit will also work for

1 Series: E87 Hatchback 2008 and up; E82 Coupe 2008 and up

3 Series: E90 Sedan 2009 and up
E92 Coupe 2008 and up
E90 M3 2009 and up
E92 M3 2008 and up
E93 Convertible 2008 and up

X Series: E70 X5 2007 and up; E71 X6 2008 and up

Z Series: E89 Z4 2009 and up

3 Series: E92 2007

5 Series: E60 2008-2010

7 Series: F01/F02 2009 and up

Open the hood and locate the angel eye ring bulb cap, twist to open it, unplug the harness and remove the stock H8 halogen bulbs inside. (Make sure turn off the engine and key off)

Use the the clamp to fold the 60 degrees arms of the H8 LED bulb in the BMW Anegl Eye Kit and insert it back to the H8 housing. (The clamp is included in the package)

Connect the Wide Angle H8 Angel Eye Bulb to the Error Free Decoder and plug the decoder back to the stock harness.

Make sure the H8 LED bulb is directly aiming to the Angel Eye Ring Tube Opening for maximized lighting performance.

Properly place the decoder, test see whether it works and close the cap. (In case it doesn't light up, simply take off the plug, flip it and install back to the stock harness again)

The End!

Please visit iJDMTOY for more about LED lights and DIY guides.