How to Make a Internal Combustion Motor Exhaust Tailpipe Extension Cold Deflection Device
58 Views, 0 Favorites, 0 Comments
How to Make a Internal Combustion Motor Exhaust Tailpipe Extension Cold Deflection Device
How to make a internal combustion motor exhaust tailpipe extension cold deflection device.
USE AT YOUR RISK, do not use abusively.
MADE IN USA, EARTH, & EHLSWAR
atzetm@live.com
1. Move to a cold zone, buy a motor vehicle
2. Appreciate the values of world rocks metals, a precision motor with production labors and times, and the need to protect the motor noticing cold breezes perhaps entering the open exhaust tailpipe.
3. Be inspired trying to protect a good motor, think of a way to stop the cold breezes from entering the open exahust tailpipe.
4. Draw various ideas. TOOLS NEEDED: paper, pen, table, chair, room.
5. Construct make the idea if conditions are conducive. TOOLS NEEDED: garage workshop, metal, soldering tool, electricity, drill and bit, 6 metal screws; patience and time, money security a times and conducive environs a times.
6. Voila! That was easy. Or perhaps not conducive conditions, and putting a kinetic mobile empty can on the tailpipe, making sure the can is loose enough to blow off if memory forgets and starts the motor. Remember to remove the can BEFORE starting the motor.
7. Or maybe the auto parts industry will buy this patent idea and the device purchased or new cars with the idea already installed.
eof
USE AT YOUR RISK, do not use abusively.
MADE IN USA, EARTH, & EHLSWAR
atzetm@live.com
1. Move to a cold zone, buy a motor vehicle
2. Appreciate the values of world rocks metals, a precision motor with production labors and times, and the need to protect the motor noticing cold breezes perhaps entering the open exhaust tailpipe.
3. Be inspired trying to protect a good motor, think of a way to stop the cold breezes from entering the open exahust tailpipe.
4. Draw various ideas. TOOLS NEEDED: paper, pen, table, chair, room.
5. Construct make the idea if conditions are conducive. TOOLS NEEDED: garage workshop, metal, soldering tool, electricity, drill and bit, 6 metal screws; patience and time, money security a times and conducive environs a times.
6. Voila! That was easy. Or perhaps not conducive conditions, and putting a kinetic mobile empty can on the tailpipe, making sure the can is loose enough to blow off if memory forgets and starts the motor. Remember to remove the can BEFORE starting the motor.
7. Or maybe the auto parts industry will buy this patent idea and the device purchased or new cars with the idea already installed.
eof