How to Make Balsa Gliders

by WingraMax in Living > Toys & Games

3372 Views, 20 Favorites, 0 Comments

How to Make Balsa Gliders

15, 2:06 PM.jpg
In this instructable you will be learning how to build homemade balsa gliders.

Find Some Blueprints

15, 2:06 PM.jpg

Cut the Fuselage

15, 2:06 PM.jpg

Now, you will cut the fuselage out of a piece of balsa wood.

Cut Out the Stabilizers and Wings

15, 2:06 PM.jpg

Now, you are going to cut out the stabilizers and wings using the template provided in your blueprints. When cutting the wings, make sure you cut a slit on each side just about halfway through the balsa. Then, bend the ends up to form a curve.

Now Glue the Stabilizers and Wings Onto the Fuselage

15, 2:07 PM.jpg

Cut Out the Fin and Glue It Onto the Fuselage

15, 2:06 PM.jpg

Be very careful when gluing the fin on. Make sure it is lined up street so the plane does not turn in weird directions when you fly it later.

You're Almost Finished!

15, 2:06 PM.jpg

Now we need to do is add a little weight to wherever you want it. This will help keep the plane flying straight and keep a balance during flight.

Cut the Rubber Band Slot

15, 2:07 PM.jpg

Cut a small piece of wood like the on in the picture. Now, glue it onto the front of the fuselage.

Glue It on Like This

15, 2:06 PM.jpg

Put the Wings on If You Haven't Yet

15, 2:06 PM.jpg

Your Done!

15, 2:07 PM.jpg

You have successfully built a model balsa glider!