How to Make the Raindrop Rainbow Loom Bracelet

Lets start by placing your first band on the top peg leading to the peg on your left.

Now place another band on the same top peg but this time leading to your right.

Continue this process.

Place your bands all the way to the end. Make sure you skip the two end pegs on your left and right.

Now place a band in the middle.

Add another band on top of the your first one you put on.

This is what it should look like.

Continue this all the way down the loom.

Make sure you put the bands on top of each other.

Now add a caping band.

Now lets loop them! Pull back the caping band.

Grab the band on top. The color I'm grabbing is white.

Pull the band over to your left.

Now pull back the caping band and grab the bottom band, mine is pink, and loop it over to the peg on your right.

This is what it should look like.

Continue this process through out the loom.

Now pull back the caping band.

Grab the top band, pull it over to the peg on your left.

Do the same thing on this side, but this time pull the band to your right.

Now take your hook and grab the blue band.

Loop that band to the peg in front of it.

Do that on both sides. This will create the single on the sides

Take your hook and push it through all the bands at the top and grab the rubber band that you should be holding.

Make sure your hook has all the bands on it. Take the rubber band that you were holding and pull one side through. Then put both side of the band on your hook.

Pull of your bracelet!!!

This is what it should look like.

Now place bands on for the add on.

Now place the raindrop part of your bracelet on the loom!

Loop all the bands to create a single chain.

Add your "C" clip now.

Now pull off your single chain.

Now enjoy your raindrop bracelet.