How to Use Fritzing for Your Arduino/RaspberryPi Instructable

by digipup1 in Circuits > Electronics

8025 Views, 38 Favorites, 0 Comments

How to Use Fritzing for Your Arduino/RaspberryPi Instructable

Screen Shot 2013-07-25 at 5.14.43 PM.png

Demonstrate schematics, breadboard layouts, and more with this application!

Download/Install

Screen Shot 2013-07-25 at 5.13.55 PM.png

Screen Shot 2013-07-25 at 5.17.49 PM.png

Screen Shot 2013-07-25 at 5.13.39 PM.png

Go to fritzing.org and click download at the top. Then choose what os you are using for example Mac OS X and it should start to download. Next open the .dmg and place the Fritzing application on your desktop or wherever you want and open Fritzing.

Running Fritzing

Screen Shot 2013-07-25 at 5.22.55 PM.png

Screen Shot 2013-07-25 at 5.23.23 PM.png

After you double click the file it should look like the first picture above. After that feel free to play around with fritzing to figure it out. You can use this so you can see what connects to what.

Finishing and Using

Screen Shot 2013-07-25 at 5.35.32 PM.png

Screen Shot 2013-07-25 at 5.37.11 PM.png

After you are done playing with it you can start using it with your instructables to clarify what is going on. An example I created is above. To use jumper wires drag the ends to the desired locations. Thanks for viewing this instructable leave a comment if you have any questions!