How to Install a Pc Fan

this is my first instructable on how to cool your gaming pc with a fan

materials needed

120mm PC fan (doesn't have to be Corsair, it could be any 120mm-sized fan.)
screws
zip ties (optional)

remove the screws holding the panel to the case. (there may be more than two screws depending on your case.)

find a 120mm fan slot. locate your point where you connect the fan. Your point will have 3 pins on it and  may have a plastic groove to help line up the pins.

make sure your screws go in straight. you should have at least two screws holding the fan on. Four screws would be optimal.

There may be two or more screws keeping the panel on. make sure to put all of them back in.
optional: secure your wire into place with zip ties to keep it out of the way.

look at your newly installed fan