How to Carve Chalk People!

by GoofyStuff in Craft > Art

829 Views, 6 Favorites, 0 Comments

How to Carve Chalk People!

chalk55.JPEG
chalk53.JPEG

Ever had a lot of chalk and not enough sidewalk to draw on? Here's a fun, kid-friendly craft that anyone can do when they're bored. Here's how you make some new little colorful friends!

Supplies

For this project, all you need are your fingernails and a stick of chalk!

Collect Supplies

chalk1.JPEG

All you need is chalk!

Start Carving the Eyes

chalk2.JPEG
chalk3.JPEG
chalk4.JPEG
chalk5.JPEG

First step is to press your thumbnail into the chalk where the eyes are going to be, then press two more lines right above the first ones.

Finish Carving the Eyes

chalk6.JPEG
chalk7.JPEG
chalk8.JPEG
chalk9.JPEG
chalk10.JPEG
chalk11.JPEG

Place your fingernail in one of the lower marks you made and carefully push it up to make the first eye. Do this several times until the eye reaches the desired height. Repeat for the other eye. (If pushing up to make the eye doesn't work for you, try going from the top to the bottom instead.)

Carving the Mouth and Chin

chalk12.JPEG
chalk13.JPEG
chalk14.JPEG
chalk15.JPEG

Now that the eyes are done, you can move on to the mouth. Push your fingernail into the chalk stick a little less than a centimeter below the eyes. When your nail is entered, push up slightly to make a little frown mouth. (If you desire a smile, flip the chalk upside-down and then follow this step.) Repeat until it is the desired size, making sure not to invade into the eyes. If you want a chin, just make two creases right below the mouth.

Begin Carving the Necktie

chalk16.JPEG
chalk17.JPEG
chalk18.JPEG
chalk19.JPEG
chalk20.JPEG
chalk21.JPEG

Begin the necktie by making a diamond right below the chin, or mouth, with your nail. This is the knot of the tie. Now make a longer diamond below the knot for the rest of the tie. Now carve two parallel lines all of the way around the chalk man's neck for the collar.

Finish Carving the Necktie

chalk30.JPEG
chalk31.JPEG
chalk32.JPEG
chalk33.JPEG
chalk34.JPEG
chalk35.JPEG

To make the tie pop out (3-dimensional), carve a layer off of the chalk person all around the tie and below the collar.

Begin Carving the Top Hat

chalk36.JPEG
chalk37.JPEG
chalk38.JPEG
chalk39.JPEG
chalk40.JPEG

Now add one more accessory! For the top hat, carve a line all the way around the top of the head, less than half a centimeter above the eyes. Make sure that it is straight, then carve a circle on the top of the head.

Form the Top Hat

chalk41.JPEG
chalk42.JPEG
chalk43.JPEG
chalk44.JPEG
chalk45.JPEG

Carefully start chipping the section between the two previously made lines off of the top of the head. Begin smoothing the brim and the top of the hat so that they are level. Now, smooth the sides of the crown so that they are perfectly parallel.

Finish Carving the Hat

chalk46.JPEG
chalk47.JPEG
chalk48.JPEG
chalk49.JPEG
chalk50.JPEG
chalk51.JPEG

To make the brim of the top hat, carve a line around the whole head and then scratch off a layer below that to make it stick out a little. Be very gentle above the eyes.

Finished!

chalk52.JPEG
chalk56.JPEG
chalk54.JPEG

Now you have a handsome little chalk man to play and draw with! Have some more fun and make more of your own chalk people!