How to Design a Maze Puzzle

Step by step process on how to design and 3D print a Ball Maze.

(Eaglebrook School)

Download / Purchase Fusion 360

Enter Fusion 360 and then select new plain.

Press create and then select 2-Point Rectangle.

Make a 150mmx150mm square

Press E to extrude the square. Then extrude it 5mm.

After making your 3d sqaure select 2-point rectangle.

Make a 5mm x 150mm rectangle of the edge of the square.

After making your Rectangle press E and then extrude it 10 mm.

Repeat step 6 and 7 until you get a shape like this.

Use the 2-Point rectangle to create all of the obstacles in your maze.

After Creating all of your obstacle's. Press e to extrude and hold shift to select all of your obstacles. This will allow you to extrude all of them at once. Extrude the obstacle's 10 mm.

After extruding your maze should look something like this.

Next select create and then sphere.

Make the sphere 7.5mm in diameter.

Make a Start and finish in your Maze by selecting create and then center diameter circle.

Put your circles where you would like your start and finish to be.

Lastly extrude your circles -2mm

The Last step is to 3D print your Maze.

Finished Product