How to Draw a 3D Car

In this instructable you will learn how to draw a 3d car.

In this instructable you will need a Pencil, pencil sharpener, and an eraser.

First of all you will have to draw a Diamond. This is going to be for the front of the car.

Now you will draw the front of the car, by drawing a rectangle at the left side. Then make the hole for the wheel by drawing a small line and then a semi circle. Remember to draw just a half circle, with no straight line going through.

First draw a line connecting the semi circle and the diamond. Then you will draw a trapezium with just slightly tilted sides.

In this step you will have to draw the exact same diamond as on the first step, just it is attached to the front window. On the picture one line is missing, make sure to draw the entire diamond.

For this step draw a diagonal line down to the level of the bottom of the front window. Then draw a straight line connecting the diagonal line and the front of the car.

Now draw another straight line below the one in the previous step, that has got a semi circle at the back. Then draw a straight line up indicating the 2 side windows. Afterwards draw 2 circles for the wheels.

This step is all yours. you can copy mine, but this is where you can get creative. Make the front of the car etc.

Take a look at how I did it.

Now you can also still add a back of the car if you would like to. That works just the same as the front, but from another angle. Drawing 2 lines of both sides of the car forms the road. You can make a fence if you would like to.

Drawing 2 lines of both sides of the car forms the road. You can make a fence if you would like to. This was the final step!