How to Make Amazing Sound Producer Using LM555 IC

by Utsource123 in Circuits > Electronics

1000 Views, 3 Favorites, 0 Comments

How to Make Amazing Sound Producer Using LM555 IC

20190902_222756.jpg

Hii friend,

Today I am going to make amazing sound generator circuit using LM555 IC.This circuit generate sound like scooter,gun bullet shooting,whistle.

Let's get started,

Take All Components As Shown Below

20190902_222816.jpg
20190902_222837.jpg
20190902_223203.jpg
20190902_223219.jpg
20190902_223149.jpg
20190902_223133.jpg
20190902_223232.jpg

Components required -

(1.) Speaker - 8 ohm

(2.) IC - LM555

(3.) Resistor -1K

(4.) Capacitor - 16V 10uf

(5.) Ceramic capacitor - 100 nf (104)

(6.) Battery clipper

(7.) Battery - 9V

Solder Pin-4 to Pin-8

20190902_222852.jpg

Firstly we have to short the pins of IC.

Solder wire between pin-4 and pin-8 of the IC as solder in the picture.

Connect Pin-2 and Pin-6

20190902_222906.jpg

Next Solder wire between pin-2 and pin-6 of the IC as solder in the picture.

Connect 1K Resistors to the IC

20190902_222920.jpg

Solder 1K resistor between pin-6 to pin-7 of the IC.

~ Again solder 1K resistor between pin-7 to pin-8 of the IC as solder in the picture.

Connect Speaker

20190902_222945.jpg

Solder +ve wire of speaker to Pin-4 of the IC and

Solder -ve wire of speaker to pin-3 of the IC as you can see in the picture.

Connect 10uf Capacitor

20190902_223003.jpg

Next solder capacitor to the circuit.

Solder +ve pin of capacitor to Pin-2 of the IC and

-ve pin of capacitor to Pin-1 of the IC as you can see in the picture.

Now Connect Battery Clipper Wire

20190902_223024.jpg

Now we have to solder wires of the Battery clipper.

Solder +ve wire of battery clipper to pin-8 of the IC and

Solder -ve pin of battery clipper to pin-1 of the IC as solder in the picture.

Now Our Circuit Is Completed

20190902_223041.jpg

Now our circuit is completed.

~ Connect battery to the battery clipper and enjoy the output sound.

Connect 100nf Ceramic Capacitor (For Other Sound)

20190902_223104.jpg

For different sound we need to connect 100nf ceramic capacitor to pin-1 and pin-2 of the IC as solder in the picture.

Different Sound

20190902_223118.jpg

Now we will get different sound comparison then before sound.

If you want to make more electronic projects like this then follow utsource123 now.

Thank you.