How to Make GumBall Candy Dispenser Machine From Cardboard DIY at Home
by diy_ocean in Craft > Cardboard
57504 Views, 43 Favorites, 0 Comments
How to Make GumBall Candy Dispenser Machine From Cardboard DIY at Home
Materials you will need-
-Cardboard
-Glue
-Wooden sticks
-Super glue
-Rubber bands
-Thick plastic/Acetate sheet
Take Cardboard Pieces of the Given Measurements and Glue Them Together As Shown.
Take 3 Cardboard Pieces of the Given Measurements and Glue Them As Shown. Make Markings at 4cm and Then 2.5 Cm As Shown.
Take a Square Cardboard Piece of 6cm With a 2cm Square Hole. Place It As Shown. Make Cardboard Cutouts of the Given Measurements. Insert Wooden Sticks Through Them and Apply Super Glue. Place the 2 Small Pieces As Shown.
Place a Rubber Band at Each End of the Wooden Stick, Double Its Thickness by Making One More Loop, and Apply Super Glue As Shown.
Take a 6cm Square Piece of Cardboard and Make a 2cm Square Slot. Place It As Shown. Take 9cm * 7cm Piece of Cardboard and Make 2 Slots of the Given Measurements. Place It As Shown.
Place the Plastic/acetate Sheet Over the Cardboard As Shown.
Take a 6cm Square Piece of Cardboard and Make a 3cm Square Slot in It, But Don't Remove the Cardboard in the Slot. Insert a Wooden Stick Through One Side of the Cut. the Slot Will Now Act an Opening in the Lid. Cut the Extra Part of the Stick.
Take 4 Cardboard Pieces of 7cm * 2.5cm and Glue Them As Shown.
Make a Handle for the Opening As Shown. Place the Lid on Top of the Plastic/acetate Sheet.
Give the Dispenser Machine a Desired Design. Your Gumball Candy Dispenser Machine Is Ready!
Watch the Video for the Complete Tutorial!
