How to Make Inverter Using 3055 Transistor

Hii friend,

Today I am going to make an inverter using 3055 Transistor.This circuit require only one transistor.

Let's get started,

Materials required -

(1.) Transformer - 12-0-12 3A/2A

(2.) Diode - 1N4007

(3.) Resistor - 4.7K

(4.) Polyester capacitor - 104J

(5.) Battery - 9V

(6.) Battery clipper

(7.) Transistor - 3055

(8.) LED - 5W

We have to solder diode

Solder Anode of diode to Base of transistor and

cathode of diode to emmiter of transistor as shown in the picture.

Next connect resistor to the capacitor as shown in the picture.

Next we have to connect capacitor to the transistor.

Connect one side leg of capacitor to the emmiter pin of transistor as shown in picture.

Now we have to connect transformer input wire.

Connect input wire of transformer to collector of transistor and

in Capacitor as you can see in the image.

Next connect LED bulb to the output wire of transformer as you can see in the picture.

Now we have to connect Input power supply wire.

Connect +ve and -ve wire of input power supply to the circuit as shown in the picture.

Now circuit is ready connect battery to the circuit and use this inverter.

NOTE : We have to give 9-12V DC input power supply.

As you can see in the picture Inverter is working completely.

Thank you