How to Make a 3D Kendama

go on a computer/laptop

• Go to '' Tinkercad'' and click on the right top
• after you've done that. go through the tutorial

• after you do the tutorial
• go to create new project

• make the cone of the kendama 16.5 cm tall and the bottom need to be 4 cm long
• get a ring like shape and place it 4 cm up from the bottom

• get a cone make it 4cm and 1.5 tall
• after duplicate it and put the tips together until its 7 inches long

after put the cups exacly 1.5 cm blow the pointy part of the cone

• get a ''half sphere'' and make it 1 cm deep
• make a duplicate and place then in the cups and make the half sphere hole and then group

• make a sphere and make it 5 cm on both height and width
• after make an cylinder that it 2 cm width and 3 cm high
• make another that is 0.2 cm width and 2 cm connect the two cylinders and group them
• put the two cylinder in the ball and group after you made the cylinder hole

make a cylinder and make it 2 cm thick and long enough to go through both the cups and the cone that you made earlier

make the new cylinder hole and group it with the kendama

• now export it as a ''STL'' and 3D print it