How to Make a Big 3D Printer at Home | 3D Printer Using Arduino

How to make a Big 3D Printer at Home | 3D Printer Using
Arduino

About this project:

In this project we make a big size 3d printer 400x400x400 mm for collage project, Video contains all dimension and required the quantity of all parts, introducing of different parts which are using for the 3d printer. Build process of 3d printer, assembly of x, y, and z-axis, basic setup of ramps 1.4 board, A4988 driver and stepper motor, Arduino coding using marlin firmware, how to use sli3er and pronterface software.

From where to buy parts and more info: https://www.hackster.io/DesiEngineer/how-to-make-a-big-3d-printer-at-home-using-arduino

Download this pdf.

in this video step by step method of building a 3d printer.

first, I made the whole model in software, a different part of the dimension of its part is attached in pdf which name is "dimension of parts"

a building of whole assembly for more reference see the youtube video.

A connection of different module as per shown images, and for more reference see the youtube video.

uploading Arduino coding using marlin firmware, then I download 2 software (slic3er and pronterface) from a net.

for first print I choose 25 mm calibration cube and result are as per image for more reference see youtube video.