How to Make a Castle

by Gryphon Adkins in Workshop > 3D Printing

195 Views, 0 Favorites, 0 Comments

How to Make a Castle

TinkerChad 10.GIF

This will teach you how to make a castle

Building the Castle Towers

TinkerChad 1.GIF

Get cubes and change them to the colour grey, then put them into a 4 by 4

TinkerChad 2.GIF

Duplicate the 4 by 4 and click and pull the arrow up so the 4 by 4 is above the other 4 by 4

TinkerChad 3.GIF

Copy it another 6 times

TinkerChad 4.GIF

Add a yellow cubes to the top and make them a 4 by 4

TInkerChad 5.GIF

Put 4 yellow cubes in the centre and move them above the 4 by 4

TInkerChad 6.GIF

Copy the grey cube(7th one up) and flatten the cube. Then turn it the colour brown and copy that around the 4 by 4 castle tower

TinkerChad 7.GIF

Make the flattened brown cubes out 3 times then add a small rectangular one and lift it a bit above the flatterned brown cubes.

TinkerChad 8.GIF

Group the castle tower and copy and paste in each corner.

Building the Wall

TinkerChad 9.GIF

Then ungroup the towers and copy then put a cube line across. Then stretch out and stretch up to 2 blocks away from the brown platform and group then copy to all bits of the castle and ungroup.

Finishing Touches

TinkerChad 10.GIF

Flatten a cube to ground height inside the castle then stretch it out in all corners of the castle. Then just decorate add a doors add trees to the inside to make it better.