How to Make a Cute Fox Decoration

This cute fox can be a present to someone it could be a cute decoration too.

hope you enjoy doing it

The materials need to make this cute decorations is

· Cardboard

· Cutting device

· Paint

· Pencil

· Glue (Hot glue or Liquid glue)

To make a 3d fox you will have to first sketch out a fox on cardboard with a pencil

Then cut out the fox out with a cutting device that you have at home

Then trace the fox on another cardboard with a pencil

Then cut the fox number 2 as well

Cut cardboard into 4 long strips

each strip has to be

width is 3cm length is 23

Plan out where you want the strips to be

Tip

It is better if the strip is two millimeters away from the edge.

Then put liquid glue or hot glue on the outer side of the fox.

Then use the strip that you cut out before, and glue it on its side, where you put the glue.

Let the glue dry, if you used hot glue then it will take around 15 to 30 minutes if you used liquid glue then it would take 3 hours max.

Stick the other template of the fox that has no drawing in it on top of the strip you glued.

Do the same thing for the other half but put the glue all around where you want it to be and so that it will match with the first half, after that glue them together and wait, if you used hot glue then it will take around 15 to 30 minutes if you used liquid glue then it would take 3 hours max.

After its dried and you are happy with your shape get creative and colour it in how ever you want.

Now you have a cute decoration :)