How to Make a Paper Popper
This instructable is a step by step guide on how to make a paper popper.
Gather Materials
materials include a couple of sheets of paper
Orient a Piece of Paper Portrait Style
Fold the Top of the Paper Towards You Approximately an Inch and Quarter in Distance
The distance can vary from an inch and a quarter to an inch and a half. (You can use the first joint of your index to approximate an inch.)
Step 4: Fold the Top of the Paper Again the Same Direction As the Previous Fold
Step 5: Continue Folding the Paper Down the Same Amount
Step 6: Repeat Step 5
Step 7: Repeat Step 6
You should still have a small portion of the paper left sticking out at the bottom after this last fold.
Flip the Paper to the Opposite Side
Fold the Longer Side of the Paper in Half So That the Previous Folds Are Perdendicular to the Crease.
Firmly Grasp the Popper As So, Holding the Thinner Paper Corner(in the Bottom Left) With Your Non-dominant Hand, and Grab the Bottom Left Corner of the Folded Paper With Your Dominant Hand.
Using Your Non-dominant Hand, Pull Down the Thicker Portion of the Paper Until the Thicker Paper Overlaps the Bottom.
Using You Dominant Hand, Grab the Pulled Down Portion of the Paper.
To Pop the Popper, Point the Two Openings in the Direction You Want to Pop the Popper. Quickly Move the Popper in That Direction to Make the Popper Pop.
