How to Make a Paper Rocket

This is a perfect rocket for kids , it's very easy to do cause you can do it with paper and tape.

The materials for this projects are:

1. Tape
2. PVC 1/2" (11")
3. Scissors
4. Instructions

Now we proceed to cut the body tube and the rocket parts.

Wrap the body around the 1/2" PVC pipe, aligning with one end of the pipe, and tape along entire seam to form a paper tube.

*Note:The PVC pipe is only used to form the shape of the rocket. Don't tape to the pvc pipe!

Then wrap the entire body tube with tape,

Cut out the circle that say presure cap it will hold the air pressure, so secure it with several pieces of tape as shown.

*Note: Dont tape to PVC pipe only attach to your paper & tape rocket body.*

Cut out the three rectangular fins and fold each into a W shape.

Cut out the funky shaped nosecone and roll it into a cone shape, overlapping (hiding) the printed circles.

Take all of these paper scraps and roll them between your hands into a cone shaped lump then just put some tape.

Finally the W shape put it with tape like the photo and finish.