How to Make a Paracord Bottle Holder

Things you will need:
• scissors
• lighter
• 8ft. of paracord
• one carabiner

First Cut 8ft of Paracord

Once you've cut your 8ft of paracord you must now cut that into three other pieces.The first piece you need is a 2ft , the second a 3ft piece, and the third is 1ft.

Next take your 2 foot piece or paracord and make an even loop.

Next loop your 1 foot piece of paracord and loop if around the 2 feet of rope you just looped.

Next tie a knot using your 1 foot piece of rope onto the 2 foot lope.

Continue tying using the cobra stitch. Tie until you see three bumps on the the side.

Now that you have finished that section we will move on to the body. First flip your progect the other way, so that the loop is facing you and start the next knot and tie it until you have six bumps on the side.

Now you have to attach your carabiner to the holder. Just slip it down the straight end , having the rope go through the carabiner.

Now that you've slipped on your carabiner you might as well clip and singe the bottom cords.

Attaching the Carabiner to the Bottle Holder.

Now take the extra cord above the carabiner and bend it underneath the body. Once you have done that do two more ties till you have a total of eight bumps.

Next pull the loose cord that's behind your holder till your carabiner is tightly in place.

Almost Done

Now you are almost done. Now all you have to do is snitch all the long ends and singe them.

You've Finished

You have finished your water bottle holder. Now all you need to do is attach it to your water bottle.