How to Make a Paracord Key Chain

A fun and easy project to make over the summer that's not time-consuming.

• keyring
• paracord
• lighter (optional) and only use if parents are around!!!!!!

Find the middle of the paracord.

Take the keyring and slide it onto the paracord.

Pull the paracord through the loop in the paracord to secure it on the keyring.

Determine the length you want your keychain to be.

At the point, you chose your length, bend the paracord into 2 loops.

Start with the left or right outter most string, and put over the 2 middle strings and under the left or right string(depending on what side you started on).

Take the string you just put under and bring it around and put it through the right or left loop ( depending on what side again) then pull tight.

Repeat step 6 and 7 on the left or right side (depending on what side you started with).

Repeat steps 6,7,8 over again until you can make the keychain anymore ( but leave about a 1 inch left of paracord).

Tie an overhand knot with the remaining 1 inch of paracord and burn the ends together with a lighter (UNDER PARENTS WATCH AND PERMISSION!!!!!!!!).

Please subscribe to my youtube channel Legos r cool and check out my other instructable Altoids flashlight.