How to Make a Ruler: Step 1

by daniel.sheinfeld in Workshop > 3D Printing

173 Views, 0 Favorites, 0 Comments

How to Make a Ruler: Step 1

7C07DE3D-E468-4EEA-BD17-E5C17A80F075.png

Put down the box shape, make it in to a rectangle and flatten it out.

Supplies

tickercad, an electronic device and WiFi

Step 2 Go to Shape Section Get Correct Shape to Make the Ruler

562EDF21-2279-49F0-979E-CEBD018D7594.png

get the tube shape make it thin and tall you will need 2 of these

Step 3 Line Up the Shapes to Be Perfectly Lined Up to the Rectangle

90EC0363-38DB-47FE-8ED4-684B88988247.png

Go the the shape section and line them up to be connected to the rectangle also make sure they are the exact same size at well to make it accurate

Step 3 Go to the Shape Section and Get the Squares

04DECFAF-F420-4FA9-8CF7-4849F3635BEE.png

after you line the tubes together get 4 squares and line them up by inches as you can see in the photo. All measurements are on photos

Step 4 Get the Numbers for the Shape Section

2ACCC3AB-3D27-46DA-A519-5CDBE2449C79.png

go to shapes and number and get 1,2,3,4,5 and put them on top on the ruler to make the ruler measure by centimeters.

Step 5 Line Every Thing Up

DB0C3875-175C-4B2A-B9FA-686D280F5C73.png
4BA8A96F-24B4-42AC-8D2B-6EF31CC5E4AB.png

make sure to line up everything and make everything connected together

Finished

You have finally made you ruler congratulations 🎉