How to Paint the Terminator

This instruction only provides an exhaustive painting process of the Terminator. And also I have recorded a video on youtube: https://youtu.be/WIt7VSOrSp4 for those who have never touched model paint.

You need a 3D printer first, then you could get this model from shapetizer.com.

Evenly spray a layer of grey & white primer both on the body and the head, so the color could stains more easily.

Mix white & black with a little green in the paint thinner. Then slightly spray it on the shirt layer by layer.

Modulate pure black with painting thinner, cover the jacket.

Convex zipper is easy to paint. A fine brush draw dabs of gold on the zipper.

This can almost be the most skillful step, to imitate human skin color really cost a considerable energy. You'd spray them layer by layer(from yellow to red) to create real skin color. To mix the first layer color: white, yellow and a little red. Keep spray until the pigment runs out.

Spray the face layer by layer until it begins to show a flesh color, every layer you need more red in the mixed pigment thinner. Concave need more red pigments.

Every metallic part painting need a black base.

Carefully draw a layer of silver on the raised bareness.

To create a wounded effect we need to stain some blood(darken red) on the edge of the bare metallic part.

Mix trifling white in the black. Then spray from the hair marginal. Darken the gaps with black, highlight several silver hair, finally embellish some details, our pop appearance comes out.

If you like my instruction, you could follow us on twitter or facebook to find more funny 3D printed stuffs.