How to Arrange Sleeping Space in Peugeot Partner Tepee

by alanhynek in Outside > Camping

58460 Views, 28 Favorites, 0 Comments

How to Arrange Sleeping Space in Peugeot Partner Tepee

IMG_8938.jpg
IMG_8934.jpg
IMG_8935.jpg
IMG_8936.jpg
Peugeot Partner is quite a nice car. It's not only spacious and convenient, but also easy to drive and frugal. There's plenty of space for 5 adults to travel relatively comfortably, and a lot of luggage space in its boot.

But let's see what else can we squeeze out of it!

Moving Front Seats

IMG_8933.jpg
IMG_8932.jpg
IMG_8931.jpg
Raise the driver's seat as much as possible by pulling the lever on its front right side up. This way we will get some extra length for mattress space. Then slide both front seats fully forward. Now we have easy access for dealing with back seats.

Removing Central Seat

IMG_8930.jpg
IMG_8929.jpg
IMG_8927.jpg
IMG_8926.jpg
IMG_8916.jpg
Now let's remove central seat. That's easy as 1-2-3 ... 4:

Fold down the seat's back (1), tilt the seat up (2), unlock it (3) and lift it up (4).

Now place the seat on its back on the passenger's front seat (5).

Notice: I have tried to fold the passenger's seat first and then place back central seat on top of it, but it doesn't seems stable enough and we don't save that much space this way. Also when the passenger seat is not folded, we keep access to the tray on its back which may be great for holding a mug of tea and snacks.

Placing Side Seats

IMG_8913.jpg
IMG_8914.jpg
IMG_8919.jpg
IMG_8925.jpg
IMG_8910.jpg
At this point we have tree seats in front and more space in the back.

Remove both remaining back seats exactly the same way as the central one. It's easier to keep them placed inside car instead of taking them out. There's plenty of space to manoeuvre them easily. 

Removed seats turn 90 degrees inward and place them on the floor just behind the front seats.

This way we can squeeze a 90 cm wide mattress. Not much for a couple. Good thing is the seats for pretty flat and even surface.

Even Wider Space!

IMG_8924.jpg
IMG_8920.jpg
IMG_8921.jpg
IMG_8922.jpg
If you need some more space you can extend it to even 110 cm!

You just need to tilt the seats' backs a little bit and push seats aside. This way you will get less even surface and a gap in the middle of seats, but this will be no problem at all if you decide to sleep with you heads on the back of the car and legs in the front.

Conclusion

With very little time and effort and no extra money you can transform your Peugeot Partner Tepee into a comfortable micro camper van. No carpentry skills, no tools and no other materials needed! All you need now is a mattress. Inflatable one, used properly will last long and let you sleep well and will use very little of your luggage space. And as you have a car with you, equip yourself with 12V mattress pump to avoid exhausting blowing part.

This way you can travel comfortably with kids and let them sleep in a tent outside, or travel just with your partner and still have plenty of space for picking hitch-hikers on your way!

Last thing. As Peugeot cooperates tightly with other French car manufacturers this instructable may work as well with Citroen Berlingo and Renault Kangoo.