How to Build PC

This shows you how to build PC

Aquire the parts that you will need

Find an open space and some way to discharge static electricity.

if you discharge your static electricity on to the motherboard it will ruin it

Take out motherboard and set it on the cardboard box that it came in. this is just a precaution to help protect it.

Then unbox RAM, CPU, CPU fan and heatsink

Being careful not to break anything but the ram into the DIMM slot

Carefully take the CPU and without bending or breaking any pins put it into the CPU slot(Line up the triangles on the CPU and on the socket)

DO NOT BEND THE PINS

Lock the CPU in place by lowering the retention cable then add the heatsink and CPU fan

If you have a video card add it to the motherboard

when everything is added it might look something like this

Mount the motherboard in the case

Unbox your power supply and mount it in the case then plug it into the 24-Pin ATX slot on your motherboard. Plug the 4 pin into the 4 pin CPU power slot.

Unbox your hard drive mount it in the case then plug into the power supply and plug it into the motherboard using SATA port

If you have a cd/rom drive install that, plug into psu power and connect to motherboard with sata.

take the USB and LED light cables and plug them into the proper place on the motherboard (Labeled).

Close case flip switch on power supply to on, plug into wall and plug in monitor, mouse and keyboard.

install your desired operating system and you are good to go