How to Clean Out a Rusty Gas Tank and Replace Oil on a Moped

by Miss Cabbit in Workshop > Motorcycles

6260 Views, 11 Favorites, 0 Comments

How to Clean Out a Rusty Gas Tank and Replace Oil on a Moped

DSC_9961.JPG
DSC_9948.JPG
DSC_9963.JPG
DSC_9964.JPG
DSC_9959.JPG
DSC_9957.JPG
DSC_9952.JPG
DSC_9951.JPG
I did this at TechShop Menlo Park. http://www.techshop.com

I have a 1978 Sachs moped that I finally got to work. It's 2 stroke motor was frozen so my friend rebuilt it. Now its time to clean out the rusty gas tank and replace the oil so I can get on the road.

Removal of Gas Tank

DSC_9949.JPG
Unscrewing of the nuts and bolts holding the gas tank to the moped.

Pouring Gas Out

DSC_9957.JPG
Old rusty gas gets poured out of the gas tank.

Cleaning

DSC_9959.JPG
About 2 cups of thinner swished around the tank got the grime and rust out. Then the tank got installed back onto the moped.

Oil Replacement

DSC_9964.JPG
DSC_9963.JPG
Unscrewing the oil compartment and filling it with oil.

My moped is road worthy now. :) Exciting!