How to Construct a (paper Prototype) Multilayered Viewing Device for IPhone.(I3DG)

This is my first instructable on how to create a iphone hologram device. This model is made out of paper but instructions on how to build the device out of acrylic (plastic) is in another instructable. This paper model is a prototype for this. I decide to create this model as no other websites have instructions on how to build or buy it. This model was designed on the I3DG. I hope you have as much fun making this and amazing your friends as i did creating this model. This model uses peppers effect of using three, 45 degree, semi-transparent mirrors to lay the segmented image on your iphone/ipod touch one in front of each other.

cut out all peices as shown

fold sided 2 times so they meet. glue together here

fold all 3 tabs on back of box then cover in glue. Afterwards fold back down so the numbers match up. 

fold tabs to 90 degrees and glue. Attach tabs to matching numbers.

attach tabs to matching numbers and glue in place.

do exactly the same and stick the tabs to the matching number. your model should look like this:

attaching the paper where the mirrors will be is not easy. match the numbers up and glue in. If your model is out of line trim a bit off the front.

Well done. Because this is my first instructable so if you have any questions just ask me in a comment!

In order to get the best results i have experimented with diffrent parts of the model and here are some pictures, discriptions and videos to show you the testing i have done.