How to Make a Big Mac Car

My name is Aidan and this is my first Instructable.

I am going to show you how to make big mac car from McDonald's containers

2 large lids

2 med lids

2 large fry containers

1 6 piece chicken nuggets container

1 BBQ dip container

1 Big Mac container

2 straws

Glue Gun with Glue Sticks (I got my Dad to help me with this)

Scissors

Pencil

Cutting Board

Glue dot inside of first fry container and slide second fry container halfway into first fry container.

Hold together until solid.

Slide the bottom half of chicken nugget container inside the second fry container. The top should cover the front of the second fry container glue front of container down to the front of the fry container.

Pop the fry container bottom out with your pencil and slide the straw through the bottom. Make it roughly even with each side of the straw sticking out of both sides.

Poke holes on each the rear bottom corners of your nugget container with a pencil. Slide straw in the holes until roughly even on both sides.

Slide medium drink lids on each side of the front axle.

Slide large drink lids on each side of the rear axles, and glue in place. Trim all excess straw material.

Glue BBQ dip container to the top of the first fry container.

Trace fin design on to Big Mac Container. Cut the tracing out. Glue to the rear top of the chicken nugget container.

Enjoy your Big Mac Racer -