How to Make a Lightbulb Terrarium

Hello,

I'm elkom and in this instructable im gonna show you how to make a lightbulb terrarium!
This is my first instructable so please say me if I did something wrong. Thanks!
So it all began whan i saw a dead lightbulb by a plant in my living room,
and i thaught what can i make out of it...
I got the idea to make a terrarium, i grabbed all the items i needed and began to  thing and go outside to get the plants...
Later on i decidet do make an instructable out of it but my camera was bad and so the pictures werent good, and here I am
Where i tell you how it began...

So let's get started!
 

To start of here is a list of all the items you need:
-Empty lightbulb,
-Wire stand (mine is pre-made),
-Plants (i used moss),
-Small Stones (not shown),
-Tweezers.

Next step.

 

First prepare the lightbulb if it isn't.
Then make a stand if you haven't.
And las but not least, put the light bulb in the stand.

Next step.

Put in the soil.

If it is too wet put it in an aluminum foil bowl on the heat. 
Put it on 3-5 level of the heat.
CAUTION: Be aware of fire!
And whatch out how it is. (I can't say the exact time becaouse you may have a differend heat)
When You think it's done get of and let sit for a few hours.
For best result get 5 minutes before it's got all dry on the heat and let sit for 12 hours.
Next, croumble the soil in small crumbs.

Next step.

Put in the plants.

I used moss.
But you can use anything you want.
Here are some examples:
-Basil,
-Moss,
-Grass,
-Tiny flowers...

When you have putten the flowers in place,put in the small stones and then water the plants.

Next step.

rvt1985 asks:

1) How did you empty the lightbulb? What kind of tools are needed?
2) How much of the plant's roots are needed for a successful transfer?
3) What kind of care does the finished terrarium need?

Answer:
1.) i broke the black glass on the end of the lightbulb and i broke the inner glass with a screwdriwer and becouse it was croumbled it just fell out.

2.) i dodnt look at te roots, but you can put how-ever you want.

3.) nothing special just dont water too much and dont expose too, too much in hot air or light or place, becouse the water will be burned becaouse of the hot place/air and try to go out and it wil fail and the inner glss will get muddy...