How to Make a Strawberry Clippie
by ArmyWife01 in Living > Kids
5271 Views, 27 Favorites, 0 Comments
How to Make a Strawberry Clippie
First choose your ribbon color.
I chose a red-pink'ish that has a satin'y sheen to it.
3/8" wide.
I dont measure anything. So, PLEASE dont ask!! I DUNNO!! I just 'do 'em
I chose a red-pink'ish that has a satin'y sheen to it.
3/8" wide.
I dont measure anything. So, PLEASE dont ask!! I DUNNO!! I just 'do 'em
make a small loop, and add a dot of glue to secure.
BE CAREFUL!!
HOT GLUE CAN AND WILL BURN!!!
I dont want to be the reason for your ER visit tonight!
BE CAREFUL!!
HOT GLUE CAN AND WILL BURN!!!
I dont want to be the reason for your ER visit tonight!
keep wrapping to make loops, and secure with that dot of glue EACH time, in the SAME place!
Again, BE CAREFUL!!!
Dont make me mention the ER again.
Again, BE CAREFUL!!!
Dont make me mention the ER again.
Make as many loops as you desire. This one has 5.
Dont worry about that sloppy glue look. *this* is the BACK of your berry!
What? Don't see the 'berry'?
hmm. let's fix that.
Dont worry about that sloppy glue look. *this* is the BACK of your berry!
What? Don't see the 'berry'?
hmm. let's fix that.
Take the berry, and SQUEEEEEZE the bottom, and turn it upside down to make this shape.
you have to pinch REALLLLY hard!
That's right.
Let that berry HAVE IT!
SQUISH HIM!
you have to pinch REALLLLY hard!
That's right.
Let that berry HAVE IT!
SQUISH HIM!
Told you it would look like a strawberry!!!
Next, get a piece of coordinating green ribbon for the 'leaves'. Cut notches on the ends for a 'V', and SEAL THEM!
Either with a lighter (not too close!!)
OR, Fray Check. (this is what I used)
same thing. just stays wet a little longer. and I figured this berry's been through enuf.
poor thing.
Next, get a piece of coordinating green ribbon for the 'leaves'. Cut notches on the ends for a 'V', and SEAL THEM!
Either with a lighter (not too close!!)
OR, Fray Check. (this is what I used)
same thing. just stays wet a little longer. and I figured this berry's been through enuf.
poor thing.
There's that 'V' on the ends. See them?
Ok, glue the 'leaves' right smack in the middle.
easy.
Ok, glue the 'leaves' right smack in the middle.
easy.
Take summore of that green ribbon, put a TINY amount of glue in the middle, and glue it together as shown.
NOT ALL THE WAY DOWN!!!!
Open up the ends of it, and glue it (CAREFULLY!!!) to the top of the berry on the 'leaves'....
NOT ALL THE WAY DOWN!!!!
Open up the ends of it, and glue it (CAREFULLY!!!) to the top of the berry on the 'leaves'....
... Like this!
make sense?
Husband wouldnt help take pics.. so I was limited with one hand...
make sense?
Husband wouldnt help take pics.. so I was limited with one hand...
OK.
Here is Berry. In all his berry gloriness.
Cute, isn't it?
Here is Berry. In all his berry gloriness.
Cute, isn't it?
Next, find MORE coordinating ribbon to line your aligator clippie.
Oh, did you flip that berry over yet? Remember what I said about the ugly glued up side!
whatever. Just use the 'pretty' side ....
Oh, did you flip that berry over yet? Remember what I said about the ugly glued up side!
whatever. Just use the 'pretty' side ....
Let's line that puppy.
Partially lined, or fully lined.
I dont care. It's up to you.
Partially lined, or fully lined.
I dont care. It's up to you.
NOW, put a TINY dab of HOT GLUE (its HOT! remember that!!!!) on the BACK (ugly) side of Berry.
And QUICKLY glue it in place on your lined clippie!!!
oooh, im excited!
And QUICKLY glue it in place on your lined clippie!!!
oooh, im excited!
Here it is all glued up!
isn't it CUUUTE?!
Now, time for some glamour shots ....
isn't it CUUUTE?!
Now, time for some glamour shots ....
Side shot.
Sure is Purdy.
Sure is Purdy.
Top shot in case you forgot how to glue that 'stem' on.