How to Make a Bottle Opener
by flattrackracer in Workshop > Metalworking
6290 Views, 17 Favorites, 0 Comments
How to Make a Bottle Opener
materials:
1 piece of 6"x1.5" piece of alluminum 1/8" thick
Procedure:
1) Drill large hole in the same location as in the picture
2) make band saw cuts inward towards the hole
3)round all edges until they are not sharp or to desired roundness
This bottle opener is very easy to make and works great. I made it at the TechShop. www.techshop.ws
1 piece of 6"x1.5" piece of alluminum 1/8" thick
Procedure:
1) Drill large hole in the same location as in the picture
2) make band saw cuts inward towards the hole
3)round all edges until they are not sharp or to desired roundness
This bottle opener is very easy to make and works great. I made it at the TechShop. www.techshop.ws