How to Make a Confetti Grenade

by badblb in Outside > Launchers

9332 Views, 16 Favorites, 0 Comments

How to Make a Confetti Grenade

IMG_6636.JPG
In This instructable i wil show you how to make a confetti grenade when trown this grenade will explode on contact

Supplies

IMG_6632.JPG
The Supplies you'll need are shown in the picture below 2 film canisters 4 rubber bands bits of torn up paper and a peace of card board about 2 times the size of a postage stamp

Filling Up

IMG_6633.JPG
In this step just basically fill the canisters equally with the paper

The Cardboard

IMG_6634.JPG
now take your piece of card board and put it on top of one canister then just put the other one on top

The Rubber Band and Safety Mode

IMG_6635.JPG
IMG_6636.JPG
there is a ready mode and a safety mode The ready mode should have one rubber band around the entire grenade like in picture 1 the safety mode should have 4 rubber bands around it like in picture 2

The Launching

IMG_6637.JPG
Now just put your grenade in ready mode and throw at your sibling I AM NOT ADVISING YOU TO DO SO IF YOU GET IN TROUBLE I AM NOT RESPONSIBLE have fun!!