How to Make a Lightingbolt Paracord Survival Bracelet

Hey guys, thanks for checking out this Instuctable. This is my first. If you have any questions, don't be afraid to ask. If you like it hit that favorite button

There will be more Instuctables to follow.


Thanks

I'm using 2 strands of 550 paracord both are 4 and a half feet long.This is for a 8 inch bracelet.
Scissors
Lighter
Ruler or any other measuring device.
And something I forgot to add in the picture is a 2 foot piece of paracord.

Take a piece of string or extra paracord. Wrap it around your wrist to where it meets, now take a ruler and measure it and add 1 inch. That's how big your going to want to make your bracelet. The extra inch is so that the bracelet fits your wrist comfortably.

Now, however many inches your bracelet is going to be, is how much paracord you are going to want. For every inch is one foot of paracord, that's the rule of thumb. So for instant, for a 8 inch bracelet you want 8 feet of paracord. Cut your lengths, melt the ends and fuse them together.

• First off find the center of your 2ft piece of paracord. After you've found that, you are going to want to measure out a half inch loop this going to be the start of your bracelet. Next you're going to make a cobra knot holding that half inch loop in place. If you don't know how to make a cobra knot, then this Instructable is not for you. Nah... I'm just kidding!! Follow the pictures and you'll have it in no time.

Make a 2nd Cobra knot.

Ok, for the first part of the braid, take whatever color you have on the right side.Take it over the top of the core. Now bring it back though the loop and pull it tight.

Now take the color you have on the left bring it under the core take it back over the top. Bring it though the loop and pull it tight.

Sorry, forgot to take picture of it when its tight.

Make a cobra braid like the one in step 5.

Now just repeat and then when you get done with that. GUESS WHAT? No, you're not done, YOU GET TO DO IT ALL OVER AGAIN!!!!!! Proceed till wanted length is reached.

Now that you've reached the wanted length. Take the 2 outside cords and snip and singe them. Make a simple overhand knot and cut the last 2 cords singe them and YOU'RE DONE GIVE YOURSELF A PAT ON THE BACK.

And there you go you're very own Lightingbolt paracord bracelet.

If you have any comments or questions be sure to ask.