How to Make a Reuseable Torch for Fire Breathing

Warning Using a torch without proper safety is hazardous to yours and others heath as well as a fire concern. Please use responsibly and remember "Only you can prevent forest fires ~Smokey Bear"

Now here's what you are getting

Here's What you need to make this:

1  Galvanized Steel pipe 1" x 12"
1  Steel 1" to 1/2" Reducer
1  Steel Galvanized Hex Bolt 1/2" x 3"
7  Cotton tube socks
1  Pair of sisscors
1  Bottle of Kerosine or Paraffin wax oil

1st you will want to lay the sock flat and cut off the neck strip making sure to get the frill as well and keeping a straight line as you cut (this is very important later on)

Next you want to cut the neck in half than again down the sides so you get 4 little squares

Keep doing this till you have 3" worth stacked tall

Now that you have you squares take your scissors and poke a hole in the center of each square

Next you want to slide the square on the bolt till it's at the end

When stacking the fabric make sure they all match up and there is no criss-cross as this will cause oil to drip and make it burn faster

Once you have placed all your fabric on the bolt go ahead and screw on the reducer (don't glue in place as you want to reuse this)

2 last things now

1 attach the reducer to the pipe by hand or using slip joint pliers making sure not to tighten to much that you can't take it apart later
and
2 soak torch head in oil of choice then lite!

AND REMEMBER have fun but BE SAFE