How to Make a Robot Gripper!

To make this project you will need:

* A small blow torch or lighter
* A glue gun
* A Dremel or rotary tool
* A few rotary tool bits(drill, sanding wheels and a cutting wheel)
* A permanent marker
* The Cutting pattern(can be found here http://kattejuice.deviantart.com/gall... )

* A micro servo
* 4 small nails or pins
* A piece of Plexiglas (acrylic, 2x2 inches or 10x10cm)
* A large paperclip
* And some sealing tape

If you don't have a rotary tool use a drill, some sanding paper and a fine saw.



This project is very cheap too! it only costs about $10!! :D

Heres the prize list:

A micro servo                   -$5 to $10 (mine was $6!)
4 small nails or pins      -FREE
A piece of Plexiglas        -$1
A large paper clip           -FREE
Some sealing tape        -$1




If you are new to robotics the you might wanna start with something simple and fun!

please go see my other videos: http://www.youtube.com/watch?v=D1speabcZNA
or this: http://www.youtube.com/watch?v=hMXTs-33xbs
or this: http://www.youtube.com/watch?v=2wJ8EMu7gOM
and don't forget this: http://www.youtube.com/watch?v=VAATI2VOjlU

Enjoy! :D